Plastic dust from the spinning nut on one of the couplers.

I recently fixed another problem with my 3D printer: damage to the z-axis caused by unsecured wires getting in the way of the z-axis limit switch. This caused the nuts to turn entirely out of their housing as the printer reached zero mechanically but couldn't trigger the limit switch to turn the motors off. Read more about the fix here. This is another reason I need to get back to the task of making cable chains and other wire management features to make this printer a little cleaner and better contained.

I recently designed something to fit inside the Pelican model 1550, one of their excellent “Protector” line of rugged, watertight cases. Although Pelican helpfully provides exact 3D models of the inside of their cases, I needed the outside geometry as well for documentation purposes. Using their models as a starting point, I built the rest of the geometry from measurements. I didn't need it to be nearly as detailed as this, but I wanted to release it on Grabcad, and I wanted that release to be as useful as possible to others. As a result this became a bit of a labor of love; I haven't gone into my time-tracking app to find out how many hours I have into this mostly because I think I'll be dismayed by the answer!